Categories
mexico-waste-incinerator

Bio Medical Waste Inineration 100kgs per hour with Water Wet Scrubber System Model TS100 PLC for COVID 19

Bio Medical Waste Inineration 100kgs per hour with Water Wet Scrubber System Model TS100 PLC for COVID 19

Items/Model

TS100(PLC)

Picture

 

Principle

Medical  Waste Incineration Treatment

Burn Rate

Average 100 kg/hour

Control Mode

PLC(Programmable Logic Controller Incinerator)

Combustion Chamber

1200L

Internal Dimensions

120x100x100cm

Secondary Chamber

600L

Smoke Filter Chamber

Yes(Dry Scrubber)(wet Scrubber Optional)

Feed Mode

Manual

Voltage

220V/380V

Power

0.7Kw

Oil Consumption (kg/hour)

average 20.4

Gas Consumption (m3/hour)

***

Temperature Monitor

Digital Display

Temperature Protection

Yes

Oil Tank

200L

Feed Door

80x60cm

Chimney

10Meter

Chimney Type

Stainless Steel

1st. Chamber Temperature

800℃–1000℃

2nd. Chamber Temperature

1000℃-1200℃

Residency Time

2.0 Sec.

Gross Weight

6000kg

External Dimensions

260x150x180cm

Categories
mexico-waste-incinerator

50-100kgs per hour temperature control Incinerator

50-100kgs per hour temperature control Incinerator

External 2000*1500*3300mm(L*W*H), height without chimney
Internal L=1600, W=675, H=700
Chamber volume(m3)=0.76;
Weight(appox tonne)= around 4.5Ton
max load capacity (kg) 300, 
Nominal burn rate uk(kg/hr.) 50-100kgs per hour
Thermal capacity(kw) =Max. 427Kw
power supply 50/60Hz =220-240V/50-60Hz
Door Apertune = 670×550;
Hot earth principle = double pass, 
Fuel type Diesel; 
Control Panel = Electric control, temperature control/timer/Emergency stop/light display,etc
Insulation board 50mm insulation super wool,
insulation fire brick = Grade E26(grade 1400oC), better than E23,
Fire brick(Alumina) = Around 42%

Model

YD-50

Picture

 

 Burning Rate

50-100 kgs/hour

Feed Capacity

Average 300 kgs/feeding

Primary Combustion Chamber

760 Liters

Secondary Combustion Chamber

300 Liters

Mix Combustion Chamber

Yes

Smoke Filter Chamber

Yes

Feed Mode

Manual

Voltage

220-240V

Power

2.0 Kw

Fuel Type

Diesel Oil

Burner

Italy Original

Oil Consumption (Diesel Oil)

Average 24.2 kg/hour

Gas Consumption (Natural Gas)

***

Internal Dimensions

1600 x 675 x 700 mm (primary chamber)

External Dimensions

2000 x 1500 x 3300 mm (without chimney)

Temperature Monitor

Yes

Oil Tank Capacity(if oil fuel)

300 Liters

Door Opening

670 x 550 mm

Chimney Length

5.0 Meters

Chimney Type

Stainless Steel

Equipment Gross Weight

4500 kgs

Operation Technical Specifications

Primary Chamber Temperature

800℃–-1000℃

Secondary Chamber Temperature

1000℃-1200℃

Residency Time

2.0 Sec.

Burning Efficiency

>98%

Waste Lower Calorific Power

3000Kcal


HICLOVER – Medical Environmental 


 

Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-06-30

Categories
mexico-waste-incinerator

Melt blown Production Line 400mm and 1600mm and ES Fiber Production Line and N95 Mask Machine and Disposable Mask Machine

1. N95 and Disposable Mask Machine

 

2. 400mm and 1600mm Melt blown Production Line

3. ES Fiber Production Line

 

 

 

N95 Face Mask Machine Production Line

Melt blown Production Line

 

A.)Optional Capacity: 1600mm

Efficiency: 95-97%

FOB Term Price: USD per set

Price Valid: 5days.

Ave.60 Days ready for shipping.

In stock Price: USD per set

 

 

B.)Optional Capacity: 400mm

Efficiency: 40-50% .

FOB Term Price: USD per set

Price Valid: 5days.

Ave.20 Days ready for shipping.

Payment: TT 70% In advance, TT 30% before leave factory

Shipping: 1*20′ container per set, Ave. 2000Kgs.

 

Main Parts: Extruder, mold, winder, oven, ultrasonic

Daily Capacity:100-150Kgs/24Hours

Screw extruder:100-150Kgs

Motor power: 15KW frequency conversion speed regulation
Reducer speed ratio: 1:10 or 1:16
Screw length to diameter ratio: 30: 1
Screw diameter: 50mm
Winding machine diameter:
£ 630mm
Winding machine drive motor power: 0.55kw
Speed ratio of winder drive reducer (if any): 1:71
Air heater power: 15kw
Power of vacuum calciner: 12kw
The size of vacuum calciner: 500 × 300 × 200
Ultrasonic power: 1800, frequency 28kHZ
Ultrasonic sink size: 800 × 300 × 250

 

 



HICLOVER – Medical Environmental 


 

Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-04-20

Categories
mexico-waste-incinerator

N95 Face Mask Machine Production Line on Sale Now! $250,000USD per set

N95 Face Mask Machine Production Line on Sale Now! $250,000USD per set

N95 Face Mask Machine Production Line on Sale Now! $250,000USD per set

l Dimension(L*W*H): 1037*855*1780

l Power Supply 15.3kw mono phase

l Net Weight: approx.: 1500kg

HICLOVER – Medical Environmental 


 

Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-04-10

Categories
mexico-waste-incinerator

FFP2 Breathing mask machine

平面口罩机参数:

Semi-Automatic Mask Machine

l Power supply: 3.3KW mono phase

l Mask Size: 175mm*80-100mm (two or three layers)

l Nonwoven (GMS): 10-50g

l Capacity: 120 to 150pcs/min

l Dimension(L*W*H):3800mm*500mm*1400mm

l Net Weight: about 1000kg

 

焊接机参数:

Welding Machine

l Capacity: 5 to 10pcs/min

l Power supply: 8.5KW mono phase

l Compressed Air connection: 0.5 to 0.7Mpa

l Dimension(L*W*H): 900mm*650mm*1380mm

l Net weight: approx. 50kg

 

KN95口罩机参数:

N95 Mask Machine

l Capacity: 130 to 160pcs/min

l Dimension(L*W*H): 1037*855*1780

l Power Supply 15.3kw mono phase

l Net Weight: approx.: 1500kg


Zhangjiagang Tengxiang Machinery Co., Ltd.
Mobile: 0086-13962221749(whatsapp)
Wechat: chncheumg

Face Mask Machine for Coronavirus Disease COVID-19



HICLOVER – Medical Environmental 


 

Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-04-06

Categories
mexico-waste-incinerator

Incinerator furnace manufacturer

Specifically designed for red bag Medical wastes with high density and high moisture content.
Each chamber should have at least one temperature sensor
One temperature sensor mounting point at the base of the exit flue ensuring that chamber reaches the necessary 800°C minimum.
Minimum 50-100% moisture

Items/Model

TS100(PLC)

Principle

Waste Incineration

Waste Treatment

Animal Waste Incineration Treatment

Burn Rate

Average 200 kg/hour

Feed Capacity

Average 1000kg

Control Mode

PLC(Programmable Logic Controller Incinerator)

Combustion Chamber

1200L

Internal Dimensions

120x100x100cm

Secondary Chamber

600L

Smoke Filter Chamber

Yes

Feed Mode

Manual

Voltage

220V

Power

0.7Kw

Oil Consumption (kg/hour)

17–36

Gas Consumption (m3/hour)

11–36.7

Temperature Monitor

Digital Display

Temperature Protection

Yes

Oil Tank

200L

Feed Door

80x60cm

Chimney

10Meter

Chimney Type

Stainless Steel

1st. Chamber Temperature

800℃–-1000℃

2nd. Chamber Temperature

1000℃-1200℃

Residency Time

2.0 Sec.

Gross Weight

6000kg

External Dimensions

260x150x180cm


Blood, drips, human faces
Human organs
Human tissues
Majority of Cancer treatment wastes
Majority of Pharmaceuticals
Surgery waste
Syringes/Needles/Sharps
Apart from the manual loading of waste, the incinerator should be automatic and easy to use or Plug and play modal
The incinerators shall be able to be operated with the following three forms of fuel and gas: Diesel, LPG and N-Gas.
Maximum load capacity of a minimum of 100kg
Burn Rate of anywhere between 50 – 80 kg/hr
Thermal Capacity 190 kwg/hr or less

Fuel Fillers,Blast Tubes,Nozzles
Diffusers,Primary & Secondary Chamber Thermocouple
Burner Ionization Probes,Burner Ionization Leads
Burner Flame Control Box,Burner ignition transformer
Complete spare burner,Thermal Resistor
It should use a Power Supply of 50/60Hz or 210/230v
A minimum of 2 chambers 
The walls of each chamber should be constructed with high grade refractory brick of a thickness anywhere between 210 – 240mm 
Each chamber should have combustion burner air fans which are automatically controlled to ensure efficient heat distribution
The supplier shall be able to provide and replace all below mentioned major spare parts for a period of 5 years (from delivery), at their own cost.